مخرطة المعادن Seiger SLZ 500E

Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine.
Location: DE
Control Brand: HEIDENHAIN
Control Model: MANUAL plus 620
Counter Spindle: No
Driven Tools: Yes (Sauter 8-station disc turret for driven tools, VDI shaft D=30 mm with digital servo motor)
Spindle Power: 20 kW
Spindle Power (100/60% ED): 20 / 25 kW
Taper Size: DIN 55027 Size 8 (Main Spindle Nose) / MT 5 (Tailstock Quill)
Tool Stations: 8-station Sauter disc turret + Parat 4-way quick-change holder Size 3
Through-Spindle Coolant: No
Max. Bar Diameter: 78 mm (through Schunk chuck) / 93 mm (spindle bore)
Max. Workpiece Diameter: 500 mm (swing over bed) / 280 mm (swing over cross slide)
Positioning Accuracy: According to DIN 8605
C-axis Specification: Pneumatically engaging with digital motor and gear drive on main spindle (Spindle speed up to 15 rpm, Torque ca. 420 Nm)
Bed Width: 350 mm
Turning Tool Cross Section (H x W): 25 x 25 mm
Spindle Diameter in Front Bearing: 130 mm
Inner Taper of Main Spindle: Metric 100
Maximum Spindle Torque: approx. 1400 Nm
Feed Force Z-axis: 10,000 N
Feed Force X-axis: 7,000 N
Feed Range (Longitudinal/Planar): 0.001 - 6000 mm/rev
Rapid Traverse Speed X/Z: 10 / 7 m/min
Tailstock Quill Diameter: 90 mm
Tailstock Quill Stroke: 180 mm
Max Workpiece Weight (Between Centers): 1,000 kg (1,250 kg with steady rest)
Max Workpiece Weight (Flying in Chuck): 300 kg (at 200 mm center of gravity distance)
Operating Voltage: 400 V / 50 Hz
Control Voltage: 24 V DC
Connected Load: 41 KVA
Current Rating: 60 A
Main Fuse: 63 A
Chip Conveyor: discharge height 1000 mm, length 535 mm, 60-degree gradient, continuous feed, ca. 250 dm³/h capacity, speed ca. 2 m/min
Two-speed Planetary Gearbox: Item 6054375, automatically shifting, flanged on main spindle motor
Parat 4-Way Turret Quick-Change Holder: Size 3, manually operated, mounted on zero-point clamping system
Sauter 8-Station Disc Turret for Driven Tools: VDI shaft D=30 mm with digital servo motor, mounted behind turning center
Boring Block: with VDI 50 retainer and internal coolant supply, mounted on zero-point clamping system in front of turning center
Zero-Point Clamping System: base part mounted on cross slide
Hydraulic Hollow Clamping Unit: Schunk ROTA THW plus D=315 mm 3-jaw chuck with DIN 55027 Size 8 mount and 78 mm bore passage
Reinforced Coolant Pump: (2.5 bar at 40 L/min, max 5.4 bar at 8 L/min) controlled via frequency inverter and potentiometer
Hand Spray Gun: connected to coolant unit
Enclosure Extension: tailstock side closed extension with pivoting door
Tailstock Driver: Item 6061611, mounted on bed slide for dragging tailstock
Machine Setup Elements: Item 6054102, 10 pcs machine feet with screws and anchors
Extraction Unit Installed: IFS Industrie-Filter-Service GmbH IF-Vario M 1600 (Model M 1600, YOM 04-2020, Weight 85 kg, 400/460 V, 50/60 Hz, 0.75 kW, 1.7/1.8 A, IP 54)
Additional Equipment
Chip protection wall
2 movable sliding safety doors with windows
machine light
Quick-change tool holder size C
coolant device
live center MT 5
operator tool set
linear scale in X-axis
safety clutch in X and Z axes