مخرطة المعادن Traub TNL 32 P

This 7-axis TRAUB TNL 32 P was manufactured in 2012. It features a maximum bar diameter of 32 mm and a maximum Z-axis travel of 305 mm. The machine includes two turrets with live tooling capabilities, offering 10 and 9 tool stations respectively. If you are looking to get high-quality turning capabilities, consider the TRAUB TNL 32 P swiss type turning machine we have for sale. Contact us for further details.
Location: DE
Control Brand: TRAUB
Control Model: TX 8i-p
Counter Spindle: yes
Driven Tools: yes
Max. Bar Diameter: 32 mm
Spindle Power: 10.7 kW
Through-spindle Coolant: yes
Number of Turrets: 2
Maximum Z-Axis Travel: 305 mm
Main Spindle Torque: 21 / 32 Nm
Main Spindle C-Axis Resolution: 0.001°
Turret 1 Tool Stations: 10
Turret 1 Live Tool Stations: 10
Turret 1 Live Tool Speed: 12,000 rpm
Turret 1 Live Tool Power: 1.5 / 2.5 kW
Turret 1 Tool Holder Diameter: 45 mm
Turret 1 Turning Tool Shank: 16 x 16 mm
Turret 1 X-Axis Travel: 140 mm
Turret 1 Z-Axis Travel: 305 mm
Turret 1 H-Axis Resolution: 0.001°
Turret 1 Chip-to-Chip Time: 0.3 sec
Turret 2 Tool Stations: 9
Turret 2 Live Tool Stations: 9
Turret 2 Live Tool Speed: 12,000 rpm
Turret 2 Live Tool Power: 1.5 / 2.5 kW
Turret 2 Tool Holder Diameter: 45 mm
Turret 2 Turning Tool Shank: 16 x 16 mm
Turret 2 X-Axis Travel: 140 mm
Turret 2 Y-Axis Travel: 25 / +40 mm
Turret 2 Z-Axis Travel: 320 mm
Turret 2 Chip-to-Chip Time: 0.3 sec
Counter Spindle Power: 1.5 / 2.5 kW
Counter Spindle Torque: 4.5 / 7.7 Nm
Counter Spindle C-Axis Resolution: 0.001°
Maximum Clamping Length: 250 mm
Maximum Bar Diameter (Counter Spindle): 32 mm
Back Working Tool Stations: 8
Back Working Live Tool Stations: 3
Back Working Live Tool Speed: 12,000 rpm
Back Working Live Tool Power: 1.5 / 2.5 kW
Back Working Tool Holder Diameter: 36 mm
Rapid Traverse (X / Y / Z): 20 / 20 / 20 m/min
Maximum Feed Rate: 20,000 mm/min
Total Power Requirement: 46 kW
Space Requirement incl. Bar Feeder: 8,000 x 2,500 x 2,600 mm
Chip Conveyor: Optional, not included
Coolant System: Yes
Tool Turrets: 2
Back Working Unit: Yes
Bar Feeder Interface: Yes
Bar Feeder: LNS Hydrobar Express 332 S2 / 3 m
Electronic Handwheel: Yes
Hydraulic Unit: Yes
Machine defects: The counter spindle is currently unusable due to prolonged inactivity. Either the sensor or the motor is defective